Latest circuit board for the charging station of all G3 - P2 Automower® models.
Charging station board G3-P2
PCB P2 CS Board Type 42-44
582 89 45-01 = Alte Version / Old Version
582 89 45-02 = Alte Version / Old Version
582 89 45-03 = Alte Version / Old Version
582 89 45 04 = Version 4 = Aktuell Version / New Version / 2024
Note:
Circuit board was changed several times. It has also been optically changed.
The circuit board is suitable for all P2 models, see list below.
After installing the new board.
Readjust the loop signal.
1. The LED on the charging station must light up green.
(If flashes, there is an error on the charging station or on the loops)
2. Place Automower® in the charging station
3. Automower® "Menu" => Security (lock symbol)
4. Check "New loop signal" okey
5. Wait, successful or changed must appear.
Herstellerangaben gem. Produktsicherheitsverordnung:
Husqvarna Deutschland GmbH
Hans-Lorenser-Straße 40
89079 Ulm
Tel. 0731 490-2500
kundenservice@husqvarna.de
.jpg "Circuit Board Charging Station all models G3 P2 -NSG3-")
.jpg "Preview: Circuit Board Charging Station all models G3 P2 -NSG3-")
.jpg "Circuit Board Charging Station all models G3 P2 -NSG3-")
